菲律宾PS认证-SAA认证,FCC认证,SRRC认证,可靠性测试,emc租场-立讯检测

菲律宾于2022年7月25日正式签署批准共和国法案RA 11900《蒸发烟碱和非烟碱产品监管法案》，自公布之日起15天生效。该法案管制蒸发烟碱和非烟碱产品(含电子烟)以及新型烟草制品的进口、制造、销售、包装、分销、使用与传播。而菲律宾贸易与工业部(DTI)颁布的第22-06号部门行政命令(DAO)《关于蒸发烟碱和非烟碱产品强制性产品认证的新技术法规》中具体规定了电子烟产品符合性要求。

The Philippines officially signed and passed Republic Act No. 11900 “Vaporized Nicotine and Non-Nicotine Products Regulation Act” on July 25, 2022, which became effective 15 days after its publication. This law regulates the importation, manufacture, sale, packaging, distribution, use, and dissemination of vaporized nicotine and non-nicotine products (including e-cigarettes) and new tobacco products. The Philippine Department of Trade and Industry (DTI) issued Administrative Order No. 22-06 (DAO), “The New Technical Regulation Concerning the Mandatory Product Certification of Vaporized Nicotine and Non-nicotine Products,” which sets forth the requirements for e-cigarette products.

产品技术要求

Product Technical Requirement

- 烟液烟碱含量不得超过65mg/mL；

- 禁止宣传可能对未成年人有过度吸引力的口味或形象，如水果、糖果、甜点或卡通人物等；

- 适用材料应符合(EU)10/2011和(EU)120/1245规定的食品接触材料迁移测试要求；

- 可充装电子烟与补充装烟液容器应具有儿童防护(CRP)、防篡改、破损和泄漏功能；

- 适用产品及相关电气附件应符合规定参考标准的要求，见下表：

- The nicotine content in the E-liquid shall not exceed 65mg/ml;

- Prohibit the promotion of flavors or images that may be overly attractive to minors, such as fruits, candies, desserts, or cartoon characters;

- Applicable materials should comply with the migration testing requirements for food contact materials specified in (EU) No. 10/2011 and (EU) No. 120/1245;

- The refillable E-cigarette and supplementary E-liquid container should have child-resistant (CRP), tamper resistance, damage and leakage prevention functions;

- Applicable products and related electrical accessories should meet the requirements of specified reference standards, as shown in the table below:

产品类型	参考标准
电子烟设备	PNS AFNOR XP D90-300-1:2019
电子烟烟液电子烟释放物	PNS AFNOR XP D90-300-2:2019 PNS AFNOR XP D90-300-3:2019
电气附件	PNS IEC 60950-1:2015或PNS IEC 62368-1:2021
适配器、外部电源	PNS IEC 61558-1:2021
可充电电池	PNS IEC 62133:2015
USB充电器	PNS IEC 62680-3:2019

Product Type	Reference Standard
E-cigarette device	PNS AFNOR XP D90-300-1:2019
E-liquid Emission	PNS AFNOR XP D90-300-2:2019 PNS AFNOR XP D90-300-3:2019
Electrical accessory	PNS IEC 60950-1:2015 or PNS IEC 62368-1:2021
Adapter and external power supply	PNS IEC 61558-1:2021
Rechargeable battery	PNS IEC 62133:2015
USB charger	PNS IEC 62680-3:2019

PS认证标识

PS Certification Mark

- 对于经认证符合安全和性能要求的蒸汽产品系统和加热烟草产品系统，PS标志的设计应符合图A；

- 对于经认证符合安全要求的蒸汽产品装置，PS标志的设计应符合图B；

- 附在产品或其包装上的PS标志可放大或缩小至适当尺寸，前提是其尺寸符合图A或图B

中的规范。

- For vapor product system and heated tobacco product system certified as conforming to the safety and performance requirements, the design of the PS Mark shall be in accordance with Figure A.

- For vapor product device certified as conforming to the safety requirements, the design of the PS Mark shall be in accordance with Figure B.

- The PS Mark affixed on a product or its package may be enlarged or reduced to an appropriate size provided that its dimensions conform to specifications in Figure A or Figure B.