各类车用电子部件:
· 车用无线电
· 暖通空调
· 防盗中控系统
· 驾驶角度传感器
· 控制器
· 显示器
· 照明
· 底盘位置传感器和控制器
· 轮胎压力传感器
· 倒车提醒装置
· ACP、VCP、CCH 功放
· 全球定位装置
· 直流马达(用于天窗、座椅、车门、车窗、雨刮器)
EMC测试项目:
· 辐射发射测量
· 传导发射测量
· 传导瞬态发射测量
· 辐射抗扰度测试—电波暗室试验法
· 辐射抗扰度测试—横向电磁波小室试验法
· 大电流注入测试—代替法
· 大电流注入测试—闭环法
· 传导瞬态抗扰度测试—电源线
· 传导瞬态抗扰度测试—信号线、电感耦合钳试验法
· 传导瞬态抗扰度测试—信号线,直接电容耦合试验法
· 传导瞬态抗扰度测试—信号线,电容耦合钳试验法
· 磁场抗扰度测试
· 静电放电测试
测试标准:
CE |
ECE R10 |
Unform provisions concerning the approval of vehicles with regard to electromagnetic compatibility. |
CISPR |
CISPR 25 |
Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers |
EN |
EN 13309 |
Construction machinery – Electromagnetic compatibility of machines with internal power supply |
EN |
EN 50498 |
Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles |
EN |
EN 55025 |
Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers |
ISO |
ISO 10605 |
Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
ISO |
ISO 11452-1 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology |
ISO |
ISO 11452-2 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure |
ISO |
ISO 11452-3 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell |
ISO |
ISO 11452-4 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI) |
ISO |
ISO 11452-5 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
ISO |
ISO 11452-7 |
Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 7: Direct radio frequency (RF) power injection |
ISO |
ISO 11452-8 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
ISO |
ISO 11452-9 |
Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 9: Portable transmitters |
ISO |
ISO 11452-10 |
Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 10: Immunity to conducted disturbances in the extended audio frequency range |
ISO |
ISO 12097-3 |
Road Vehicles – Airbag Components – Part 3: Testing of Inflator Assemblies |
ISO |
ISO 13766 |
Earth-moving machinery Electromagnetic compatibility |
ISO |
ISO 16750-2 |
Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads |
ISO |
ISO 17025 |
General requirements for the competence of testing and calibration laboratories |
ISO |
ISO 7637-1 |
Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
ISO |
ISO 7637-1-2 |
|
ISO |
ISO 7637-2 |
Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only |
ISO |
ISO 7637-3 |
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
SAE |
J1113-3 |
Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power |
SAE |
J1113-4 |
IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS.BULK CURRENT INJECTION (BCI) METHOD |
SAE |
J1113-11 |
Immunity to Conducted Transients on Power Leads |
SAE |
J1113-12 |
Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines |
SAE |
J1113-13 |
Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge |
SAE |
J1113-21 |
Electronmagnetic Compatibility Measurement Procedure for Vehicle Components – Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber |
SAE |
J1113-22 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields |
SAE |
J1113-23 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice |
SAE |
J1113-24 |
Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz—Crawford TEM Cell and 10 kHz to 5 GHz—Wideband TEM Cell |
SAE |
J1113-41 |
Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles |
SAE |
J1113-42 |
Electromagnetic Compatibility—Component Test Procedure—Part 42—Conducted Transient Emissions |
ECE R10 |
CISPR 25 |
EN 13309 |
EN 50498 |
EN 55025 |
ISO 10605 |
ISO 11452-1 |
ISO 11452-2 |
ISO 11452-3 |
ISO 11452-4 |
ISO 11452-5 |
ISO 11452-7 |
ISO 11452-8 |
ISO 11452-9 |
ISO 11452-10 |
ISO 12097-3 |
ISO 13766 |
ISO 16750-2 |
ISO 17025 |
ISO 7637-1 |
ISO 7637-1-2 |
ISO 7637-2 |
ISO 7637-3 |
J1113-3 |
J1113-4 |
J1113-11 |
J1113-12 |
J1113-13 |
J1113-21 |
J1113-22 |
J1113-23 |
J1113-24 |
J1113-41 |
J1113-42 |
|
|
专业设备:
· 3米电波暗室
· CISPR25电波暗室
· 罗德与施瓦茨ESR3 EMI接收机
· 夏弗纳CBA 9436射频功放
· CPI VZS/C-6963J2功放
· AR FL7006场强探头
· 罗德与施瓦茨E8257D信号发生器
· Milmega AS0104-400/200ST RF射频功放
· AR100W1000B 100W功放
· 特测NSG437静电放电枪
· EM Test传导瞬态抗扰度测试系统
· 泰克TDS 3054B示波器
· 高压人工网络
· EM Test连续波模拟器